Solar Panel Installation

About Course

Admission is by request. To join this course, send an admission request at https://training.gquestglobal.com/admissions/ and we will reply by email. Approved applicants receive enrollment and a Founding Pass offer.

How solar panel systems are installed and brought into service, from the first site survey to commissioning and customer handover. Twenty modules in four learning paths, Foundation, Installer, Lead and Inspector, and Homeowner awareness, covering safety, design, codes and permitting, mounting, wiring, battery storage installation, and troubleshooting. Every module pairs a full lesson with a five question Check at an eighty percent pass mark. The course is aligned to industry codes and standards including the National Electrical Code and NFPA 855 for energy storage, and it prepares learners for the work without claiming any third party certification.

Course Content

Course Modules

Module 0: The complete system at a glance
Module 0 Check
Module 1: Installer safety first
Module 1 Check
Module 2: Site assessment and survey
Module 2 Check
Module 3: System design basics
Module 3 Check
Module 4: Codes, standards, and permitting
Module 4 Check
Module 5: Roof mounting and racking
Module 5 Check
Module 6: Ground mounts and other structures
Module 6 Check
Module 7: Module installation and direct current wiring
Module 7 Check
Module 8: String sizing in practice
Module 8 Check
Module 9: Inverters, string, micro, and hybrid
Module 9 Check
Module 10: Grounding, bonding, and surge protection
Module 10 Check
Module 11: Rapid shutdown, disconnects, and labeling
Module 11 Check
Module 12: Battery storage installation
Module 12 Check
Module 13: The battery management system in depth
Module 13 Check
Module 14: Energy management and system configuration
Module 14 Check
Module 15: Commissioning the complete system
Module 15 Check
Module 16: Inspection, interconnection, and permission to operate
Module 16 Check
Module 17: Monitoring setup and customer handover
Module 17 Check
Module 18: Maintenance and service routines
Module 18 Check
Module 19: Troubleshooting the complete system
Module 19 Check

About Course

Course Content

Course Modules

Module 0: The complete system at a glance

Module 0 Check

Module 1: Installer safety first

Module 1 Check

Module 2: Site assessment and survey

Module 2 Check

Module 3: System design basics

Module 3 Check

Module 4: Codes, standards, and permitting

Module 4 Check

Module 5: Roof mounting and racking

Module 5 Check

Module 6: Ground mounts and other structures

Module 6 Check

Module 7: Module installation and direct current wiring

Module 7 Check

Module 8: String sizing in practice

Module 8 Check

Module 9: Inverters, string, micro, and hybrid

Module 9 Check

Module 10: Grounding, bonding, and surge protection

Module 10 Check

Module 11: Rapid shutdown, disconnects, and labeling

Module 11 Check

Module 12: Battery storage installation

Module 12 Check

Module 13: The battery management system in depth

Module 13 Check

Module 14: Energy management and system configuration

Module 14 Check

Module 15: Commissioning the complete system

Module 15 Check

Module 16: Inspection, interconnection, and permission to operate

Module 16 Check

Module 17: Monitoring setup and customer handover

Module 17 Check

Module 18: Maintenance and service routines

Module 18 Check

Module 19: Troubleshooting the complete system

Module 19 Check