Industrial Maintenance and Mechatronics

About Course

Admission is by request. To join this course, send an admission request at https://training.gquestglobal.com/admissions/ and we will reply by email. Approved applicants receive enrollment and a Founding Pass offer.

How industrial equipment is kept safe, reliable, and productive, from maintenance foundations and lockout safety to mechanical, electrical, and fluid power systems, controls, and reliability leadership. Twenty one modules in four learning paths, Foundation, Operator, Maintenance Technician, and Lead and Reliability, closing with five Technician Deep Dives on maintenance management systems, total productive maintenance, vibration analysis, PLC troubleshooting, and maintenance leadership. Every module pairs a full lesson with a five question Check at an eighty percent pass mark. The course is aligned preparation for the MSSC Certified Production Technician credential family, and it prepares learners for the work without claiming any third party certification.

Course Content

Course Modules

Module 0: Foundations of industrial maintenance and the mechatronics craft
Module 0 Check
Module 1: Safety first, lockout and tagout
Module 1 Check
Module 2: Mechanical systems and machine elements
Module 2 Check
Module 3: Bearings, belts, chains, and gears
Module 3 Check
Module 4: Lubrication fundamentals and practice
Module 4 Check
Module 5: Electrical fundamentals for maintenance technicians
Module 5 Check
Module 6: Motor controls and variable speed drives
Module 6 Check
Module 7: Hydraulics and fluid power fundamentals
Module 7 Check
Module 8: Pneumatics and compressed air systems
Module 8 Check
Module 9: Sensors, instruments, and measurement
Module 9 Check
Module 10: Programmable logic controllers for technicians
Module 10 Check
Module 11: Robotics and automation maintenance awareness
Module 11 Check
Module 12: Preventive maintenance that works
Module 12 Check
Module 13: Predictive maintenance and condition monitoring
Module 13 Check
Module 14: Vibration and thermal inspection basics
Module 14 Check
Module 15: Structured troubleshooting and root cause analysis
Module 15 Check
Module 16: CMMS and maintenance planning, in depth (Deep Dive)
Module 16 Check
Module 17: Total productive maintenance and reliability, in depth (Deep Dive)
Module 17 Check
Module 18: Vibration analysis and diagnostics, in depth (Deep Dive)
Module 18 Check
Module 19: PLC troubleshooting and diagnostics, in depth (Deep Dive)
Module 19 Check
Module 20: Maintenance leadership and continuous improvement, in depth (Deep Dive)
Module 20 Check

About Course

Course Content

Course Modules

Module 0: Foundations of industrial maintenance and the mechatronics craft

Module 0 Check

Module 1: Safety first, lockout and tagout

Module 1 Check

Module 2: Mechanical systems and machine elements

Module 2 Check

Module 3: Bearings, belts, chains, and gears

Module 3 Check

Module 4: Lubrication fundamentals and practice

Module 4 Check

Module 5: Electrical fundamentals for maintenance technicians

Module 5 Check

Module 6: Motor controls and variable speed drives

Module 6 Check

Module 7: Hydraulics and fluid power fundamentals

Module 7 Check

Module 8: Pneumatics and compressed air systems

Module 8 Check

Module 9: Sensors, instruments, and measurement

Module 9 Check

Module 10: Programmable logic controllers for technicians

Module 10 Check

Module 11: Robotics and automation maintenance awareness

Module 11 Check

Module 12: Preventive maintenance that works

Module 12 Check

Module 13: Predictive maintenance and condition monitoring

Module 13 Check

Module 14: Vibration and thermal inspection basics

Module 14 Check

Module 15: Structured troubleshooting and root cause analysis

Module 15 Check

Module 16: CMMS and maintenance planning, in depth (Deep Dive)

Module 16 Check

Module 17: Total productive maintenance and reliability, in depth (Deep Dive)

Module 17 Check

Module 18: Vibration analysis and diagnostics, in depth (Deep Dive)

Module 18 Check

Module 19: PLC troubleshooting and diagnostics, in depth (Deep Dive)

Module 19 Check

Module 20: Maintenance leadership and continuous improvement, in depth (Deep Dive)

Module 20 Check