About Course
Admission is by request. To join this course, send an admission request at https://training.gquestglobal.com/admissions/ and we will reply by email. Approved applicants receive enrollment and a Founding Pass offer.
Complete PCB assembly training in process order, from design review and kitting through printing, placement, reflow, inspection, testing, coating, and final packing. Every stage carries a full lesson, a training video, the key numbers, the defects to spot, and a stage check.
This training is aligned to IPC A 610 and J STD 001. It issues a certificate of completion and does not grant IPC certification.
Open the full course with all 18 stages
Course stages
- Stage 0: Pre production, DFM, documentation and programming
- Stage 1: Incoming inspection, storage, ESD and moisture control
- Stage 2: Board loading and bare board preparation
- Stage 3: Solder paste printing
- Stage 4: Solder paste inspection
- Stage 5: Component placement
- Stage 6: Reflow soldering
- Stage 7: Automated optical inspection
- Stage 8: X ray inspection
- Stage 9: Through hole insertion
- Stage 10: Wave and selective soldering
- Stage 11: Cleaning
- Stage 12: Hand soldering, touch up and rework
- Stage 13: Electrical test, ICT and flying probe
- Stage 14: Functional test and system test
- Stage 15: Conformal coating
- Stage 16: Depaneling
- Stage 17: Final assembly, final inspection and packing
Course Content
Stage 0: Pre production, DFM, documentation and programming
-
Stage 0: Pre production, DFM, documentation and programming
00:00 -
Stage 0 Check