Battery Energy Storage Systems: Installation, Commissioning, Operations and Safety

About Course

Admission is by request. To join this course, send an admission request at https://training.gquestglobal.com/admissions/ and we will reply by email. Approved applicants receive enrollment and a Founding Pass offer.

How battery energy storage systems are installed, commissioned, operated, and kept safe in the field, from system architecture and codes to fire protection, operations, and troubleshooting. Twenty one modules in four learning paths, Foundation, Installer, Technician and Commissioning, and Safety and Lead, closing with three Deep Dives on commissioning troubleshooting, thermal runaway and emergency response, and lifecycle leadership. Every module pairs a full lesson with a five question Check at an eighty percent pass mark. The course is aligned to industry standards including NFPA 855, NFPA 70E, and UL 9540, and it prepares learners toward the NABCEP energy storage credential without claiming any third party certification.

Course Content

Course Modules

Module 0: The complete storage system in the field
Module 0 Check
Module 1: Storage architecture and chemistries in the field
Module 1 Check
Module 2: Electrical and thermal fundamentals for storage technicians
Module 2 Check
Module 3: Safety first and qualified work
Module 3 Check
Module 4: Codes, standards, permits and the authority having jurisdiction
Module 4 Check
Module 5: Site assessment and design inputs
Module 5 Check
Module 6: Logistics, receiving, handling and site storage
Module 6 Check
Module 7: Foundations, enclosures, placement and clearances
Module 7 Check
Module 8: Battery installation: racks, cabinets, modules and connections
Module 8 Check
Module 9: Power conversion and alternating current integration
Module 9 Check
Module 10: Grounding, bonding, surge protection and labeling
Module 10 Check
Module 11: Fire protection, ventilation, detection and separation
Module 11 Check
Module 12: Battery management and energy management in operation
Module 12 Check
Module 13: Controls, communications and monitoring networks
Module 13 Check
Module 14: Precommissioning inspections and tests
Module 14 Check
Module 15: Energization, functional commissioning and acceptance
Module 15 Check
Module 16: Operations, monitoring and preventive maintenance
Module 16 Check
Module 17: Fault finding, alarms and service troubleshooting
Module 17 Check
Module 18: Technician Deep Dive, commissioning troubleshooting masterclass
Module 18 Check
Module 19: Technician Deep Dive, thermal runaway and emergency response masterclass
Module 19 Check
Module 20: Technician Deep Dive, lifecycle leadership, reliability, decommissioning and recycling
Module 20 Check

About Course

Course Content

Course Modules

Module 0: The complete storage system in the field

Module 0 Check

Module 1: Storage architecture and chemistries in the field

Module 1 Check

Module 2: Electrical and thermal fundamentals for storage technicians

Module 2 Check

Module 3: Safety first and qualified work

Module 3 Check

Module 4: Codes, standards, permits and the authority having jurisdiction

Module 4 Check

Module 5: Site assessment and design inputs

Module 5 Check

Module 6: Logistics, receiving, handling and site storage

Module 6 Check

Module 7: Foundations, enclosures, placement and clearances

Module 7 Check

Module 8: Battery installation: racks, cabinets, modules and connections

Module 8 Check

Module 9: Power conversion and alternating current integration

Module 9 Check

Module 10: Grounding, bonding, surge protection and labeling

Module 10 Check

Module 11: Fire protection, ventilation, detection and separation

Module 11 Check

Module 12: Battery management and energy management in operation

Module 12 Check

Module 13: Controls, communications and monitoring networks

Module 13 Check

Module 14: Precommissioning inspections and tests

Module 14 Check

Module 15: Energization, functional commissioning and acceptance

Module 15 Check

Module 16: Operations, monitoring and preventive maintenance

Module 16 Check

Module 17: Fault finding, alarms and service troubleshooting

Module 17 Check

Module 18: Technician Deep Dive, commissioning troubleshooting masterclass

Module 18 Check

Module 19: Technician Deep Dive, thermal runaway and emergency response masterclass

Module 19 Check

Module 20: Technician Deep Dive, lifecycle leadership, reliability, decommissioning and recycling

Module 20 Check